LNG storage tank Risavika, Norway

Norconsult was responsible engineer for the design of a 32 000m3 full containment LNG storage tank for Lyse Infra AS. Norconsult prepared all technical documentation and drawings for the contractor and for third party approval, by DNV GL.

Project name

Detail design of a 32 000 cubic meter LNG tank in Risavika, Norway


Lyse Infra AS



Time span

2007 to 2012

Key figures

• 32 000m3 LNG tank design • BOG <0.07% • EN 1473 • EN 14620


Norconsult was engaged as responsible engineer to perform the design of all foundation works at site, including the foundation for the LNG tank. This also included risk assessment, as well as HAZID and HAZOP of the LNG tank and process line between LNG tank and the process plant. The project included an early phase study of the LNG tank with regards to location, tank type selection, sizing and design pressure


Norconsult designed a full containment LNG tank according to the European standards EN 1473 and EN 14620. The design includes an inner tank of 9 percent nickel steel, and an outer tank of cast concrete. The design included evaluation and selection of insulation materials to minimize evaporation (BOG) of LNG stored at -162°C. Abacus was applied to perform finite element analysis (FEA) for the tank, based on earthquake calculations from a response spectrum analysis. Other software such as 3D analysis, Staad-Pro and Concrete Design - Postprocessing (developed by Norconsult) was also used in the tank design. Norconsult assisted the owner during the construction phase and follow up towards accredited control body DNV GL and process contractor.


The project was delivered at budget cost and on time. It was erected as planned, with no harm to personnel or equipment.

  • Stian Carl Erichsen

    Prosjektdirektør Energigasser

  • Contact us